Biomass Gasification - Process analysis and dimensioning aspects for downdraft units and gas cleaning lines

In such territories where food production is mostly scattered in several small / medium size or even domestic farms, a lot of heterogeneous residues are produced yearly, since farmers usually carry out different activities in their properties. The amount and composition of farm residues, therefore, widely change during year, according to the single production process periodically achieved. Coupling high efficiency micro-cogeneration energy units with easy handling biomass conversion equipments, suitable to treat different materials, would provide many important advantages to the farmers and to the community as well, so that the increase in feedstock flexibility of gasification units is nowadays seen as a further paramount step towards their wide spreading in rural areas and as a real necessity for their utilization at small scale. Two main research topics were thought to be of main concern at this purpose, and they were therefore discussed in this work: the investigation of fuels properties impact on gasification process development and the technical feasibility of small scale gasification units integration with cogeneration systems. According to these two main aspects, the present work was thus divided in two main parts. The first one is focused on the biomass gasification process, that was investigated in its theoretical aspects and then analytically modelled in order to simulate thermo-chemical conversion of different biomass fuels, such as wood (park waste wood and softwood), wheat straw, sewage sludge and refuse derived fuels. The main idea is to correlate the results of reactor design procedures with the physical properties of biomasses and the corresponding working conditions of gasifiers (temperature profile, above all), in order to point out the main differences which prevent the use of the same conversion unit for different materials. At this scope, a gasification kinetic free model was initially developed in Excel sheets, considering different values of air to biomass ratio and the downdraft gasification technology as particular examined application. The differences in syngas production and working conditions (process temperatures, above all) among the considered fuels were tried to be connected to some biomass properties, such elementary composition, ash and water contents. The novelty of this analytical approach was the use of kinetic constants ratio in order to determine oxygen distribution among the different oxidation reactions (regarding volatile matter only) while equilibrium of water gas shift reaction was considered in gasification zone, by which the energy and mass balances involved in the process algorithm were linked together, as well. Moreover, the main advantage of this analytical tool is the easiness by which the input data corresponding to the particular biomass materials can be inserted into the model, so that a rapid evaluation on their own thermo-chemical conversion properties is possible to be obtained, mainly based on their chemical composition A good conformity of the model results with the other literature and experimental data was detected for almost all the considered materials (except for refuse derived fuels, because of their unfitting chemical composition with the model assumptions). Successively, a dimensioning procedure for open core downdraft gasifiers was set up, by the analysis on the fundamental thermo-physical and thermo-chemical mechanisms which are supposed to regulate the main solid conversion steps involved in the gasification process. Gasification units were schematically subdivided in four reaction zones, respectively corresponding to biomass heating, solids drying, pyrolysis and char gasification processes, and the time required for the full development of each of these steps was correlated to the kinetics rates (for pyrolysis and char gasification processes only) and to the heat and mass transfer phenomena from gas to solid phase. On the basis of this analysis and according to the kinetic free model results and biomass physical properties (particles size, above all) it was achieved that for all the considered materials char gasification step is kinetically limited and therefore temperature is the main working parameter controlling this step. Solids drying is mainly regulated by heat transfer from bulk gas to the inner layers of particles and the corresponding time especially depends on particle size. Biomass heating is almost totally achieved by the radiative heat transfer from the hot walls of reactor to the bed of material. For pyrolysis, instead, working temperature, particles size and the same nature of biomass (through its own pyrolysis heat) have all comparable weights on the process development, so that the corresponding time can be differently depending on one of these factors according to the particular fuel is gasified and the particular conditions are established inside the gasifier. The same analysis also led to the estimation of reaction zone volumes for each biomass fuel, so as a comparison among the dimensions of the differently fed gasification units was finally accomplished. Each biomass material showed a different volumes distribution, so that any dimensioned gasification unit does not seem to be suitable for more than one biomass species. Nevertheless, since reactors diameters were found out quite similar for all the examined materials, it could be envisaged to design a single units for all of them by adopting the largest diameter and by combining together the maximum heights of each reaction zone, as they were calculated for the different biomasses. A total height of gasifier as around 2400mm would be obtained in this case. Besides, by arranging air injecting nozzles at different levels along the reactor, gasification zone could be properly set up according to the particular material is in turn gasified. Finally, since gasification and pyrolysis times were found to considerably change according to even short temperature variations, it could be also envisaged to regulate air feeding rate for each gasified material (which process temperatures depend on), so as the available reactor volumes would be suitable for the complete development of solid conversion in each case, without even changing fluid dynamics behaviour of the unit as well as air/biomass ratio in noticeable measure. The second part of this work dealt with the gas cleaning systems to be adopted downstream the gasifiers in order to run high efficiency CHP units (i.e. internal engines and micro-turbines). Especially in the case multi–fuel gasifiers are assumed to be used, weightier gas cleaning lines need to be envisaged in order to reach the standard gas quality degree required to fuel cogeneration units. Indeed, as the more heterogeneous feed to the gasification unit, several contaminant species can simultaneously be present in the exit gas stream and, as a consequence, suitable gas cleaning systems have to be designed. In this work, an overall study on gas cleaning lines assessment is carried out. Differently from the other research efforts carried out in the same field, the main scope is to define general arrangements for gas cleaning lines suitable to remove several contaminants from the gas stream, independently on the feedstock material and the energy plant size The gas contaminant species taken into account in this analysis were: particulate, tars, sulphur (in H2S form), alkali metals, nitrogen (in NH3 form) and acid gases (in HCl form). For each of these species, alternative cleaning devices were designed according to three different plant sizes, respectively corresponding with 8Nm3/h, 125Nm3/h and 350Nm3/h gas flows. Their performances were examined on the basis of their optimal working conditions (efficiency, temperature and pressure drops, above all) and their own consumption of energy and materials. Successively, the designed units were combined together in different overall gas cleaning line arrangements, paths, by following some technical constraints which were mainly determined from the same performance analysis on the cleaning units and from the presumable synergic effects by contaminants on the right working of some of them (filters clogging, catalysts deactivation, etc.). One of the main issues to be stated in paths design accomplishment was the tars removal from the gas stream, preventing filters plugging and/or line pipes clogging At this scope, a catalytic tars cracking unit was envisaged as the only solution to be adopted, and, therefore, a catalytic material which is able to work at relatively low temperatures was chosen. Nevertheless, a rapid drop in tars cracking efficiency was also estimated for this same material, so that an high frequency of catalysts regeneration and a consequent relevant air consumption for this operation were calculated in all of the cases. Other difficulties had to be overcome in the abatement of alkali metals, which condense at temperatures lower than tars, but they also need to be removed in the first sections of gas cleaning line in order to avoid corrosion of materials. In this case a dry scrubber technology was envisaged, by using the same fine particles filter units and by choosing for them corrosion resistant materials, like ceramic ones. Besides these two solutions which seem to be unavoidable in gas cleaning line design, high temperature gas cleaning lines were not possible to be achieved for the two larger plant sizes, as well. Indeed, as the use of temperature control devices was precluded in the adopted design procedure, ammonia partial oxidation units (as the only considered methods for the abatement of ammonia at high temperature) were not suitable for the large scale units, because of the high increase of reactors temperature by the exothermic reactions involved in the process. In spite of these limitations, yet, overall arrangements for each considered plant size were finally designed, so that the possibility to clean the gas up to the required standard degree was technically demonstrated, even in the case several contaminants are simultaneously present in the gas stream. Moreover, all the possible paths defined for the different plant sizes were compared each others on the basis of some defined operational parameters, among which total pressure drops, total energy losses, number of units and secondary materials consumption. On the basis of this analysis, dry gas cleaning methods proved preferable to the ones including water scrubber technology in al of the cases, especially because of the high water consumption provided by water scrubber units in ammonia adsorption process. This result is yet connected to the possibility to use activated carbon units for ammonia removal and Nahcolite adsorber for chloride acid. The very high efficiency of this latter material is also remarkable. Finally, as an estimation of the overall energy loss pertaining the gas cleaning process, the total enthalpy losses estimated for the three plant sizes were compared with the respective gas streams energy contents, these latter obtained on the basis of low heating value of gas only. This overall study on gas cleaning systems is thus proposed as an analytical tool by which different gas cleaning line configurations can be evaluated, according to the particular practical application they are adopted for and the size of cogeneration unit they are connected to.

Percorsi di gender performance: fotografia tra arte e moda dagli anni Novanta ad oggi

My project explores and compares different forms of gender performance in contemporary art and visual culture according to a perspective centered on photography. Thanks to its attesting power this medium can work as a ready-made. In fact during the 20th century it played a key role in the cultural emancipation of the body which (using a Michel Foucault’s expression) has now become «the zero point of the world». Through performance the body proves to be a living material of expression and communication while photography ensures the recording of any ephemeral event that happens in time and space. My questioning approach considers the gender constructed imagery from the 1990s to the present in order to investigate how photography’s strong aura of realism promotes and allows fantasies of transformation. The contemporary fascination with gender (especially for art and fashion) represents a crucial issue in the global context of postmodernity and is manifested in a variety of visual media, from photography to video and film. Moreover the internet along with its digital transmission of images has deeply affected our world (from culture to everyday life) leading to a postmodern preference for performativity over the more traditional and linear forms of narrativity. As a consequence individual borders get redefined by the skin itself which (dissected through instant vision) turns into a ductile material of mutation and hybridation in the service of identity. My critical assumptions are taken from the most relevant changes occurred in philosophy during the last two decades as a result of the contributions by Jacques Lacan, Michel Foucault, Jacques Derrida, Gilles Deleuze who developed a cross-disciplinary and comparative approach to interpret the crisis of modernity. They have profoundly influenced feminist studies so that the category of gender has been reassessed in contrast with sex (as a biological connotation) and in relation to history, culture, society. The ideal starting point of my research is the year 1990. I chose it as the approximate historical moment when the intersection of race, class and gender were placed at the forefront of international artistic production concerned with identity, diversity and globalization. Such issues had been explored throughout the 1970s but it was only from the mid-1980s onward that they began to be articulated more consistently. Published in 1990, the book "Gender trouble: feminism and the subversion of identity" by Judith Butler marked an important breakthrough by linking gender to performance as well as investigating the intricate connections between theory and practice, embodiment and representation. It inspired subsequent research in a variety of disciplines, art history included. In the same year Teresa de Lauretis launched the definition of queer theory to challenge the academic perspective in gay and lesbian studies. In the meantime the rise of Third Wave Feminism in the US introduced a racially and sexually inclusive vision over the global situation in order to reflect on subjectivity, new technologies and popular culture in connection with gender representation. These conceptual tools have enabled prolific readings of contemporary cultural production whether fine arts or mass media. After discussing the appropriate framework of my project and taking into account the postmodern globalization of the visual, I have turned to photography to map gender representation both in art and in fashion. Therefore I have been creating an archive of images around specific topics. I decided to include fashion photography because in the 1990s this genre moved away from the paradigm of an idealized and classical beauty toward a new vernacular allied with lifestyles, art practices, pop and youth culture; as one might expect the dominant narrative modes in fashion photography are now mainly influenced by cinema and snapshot. These strategies originate story lines and interrupted narratives using models’ performance to convey a particular imagery where identity issues emerge as an essential part of fashion spectacle. Focusing on the intersections of gender identities with socially and culturally produced identities, my approach intends to underline how the fashion world has turned to current trends in art photography and in some case turned to the artists themselves. The growing fluidity of the categories that distinguish art from fashion photography represents a particularly fruitful moment of visual exchange. Varying over time the dialogue between these two fields has always been vital; nowadays it can be studied as a result of this close relationship between contemporary art world and consumer culture. Due to the saturation of postmodern imagery the feedback between art and fashion has become much more immediate and then increasingly significant for anyone who wants to investigate the construction of gender identity through performance. In addition to that a lot of magazines founded in the 1990s bridged the worlds of art and fashion because some of their designers and even editors were art-school graduates encouraging innovation. The inclusion of art within such magazines aimed at validating them as a form of art in themselves supporting a dynamic intersection for music, fashion, design and youth culture: an intersection that also contributed to create and spread different gender stereotypes. This general interest in fashion produced many exhibitions of and about fashion itself at major international venues such as the Victoria and Albert Museum in London, the Metropolitan Museum of Art and the Solomon R. Guggenheim Museum in New York. Since then this celebrated success of fashion has been regarded as a typical element of postmodern culture. Owing to that I have also based my analysis on some important exhibitions dealing with gender performance like "Féminin-Masculin" at the Centre Pompidou of Paris (1995), "Rrose is a Rrose is a Rrose. Gender performance in photography" at the Solomon R. Guggenheim Museum of New York (1997), "Global Feminisms" at the Brooklyn Museum (2007), "Female Trouble" at the Pinakothek der Moderne in München together with the workshops dedicated to "Performance: gender and identity" in June 2005 at the Tate Modern of London. Since 2003 in Italy we have had Gender Bender - an international festival held annually in Bologna - to explore the gender imagery stemming from contemporary culture. In few days this festival offers a series of events ranging from visual arts, performance, cinema, literature to conferences and music. Being aware that any method of research is neither race nor gender neutral I have traced these critical paths to question gender identity in a multicultural perspective taking account of the political implications too. In fact, if visibility may be equated with exposure, we can also read these images as points of intersection of visibility with social power. Since gender assignations rely so heavily on the visual, the postmodern dismantling of gender certainty through performance has wide-ranging effects that need to be analyzed. In some sense this practice can even contest the dominance of visual within postmodernism. My visual map in contemporary art and fashion photography includes artists like Nan Goldin, Cindy Sherman, Hellen van Meene, Rineke Dijkstra, Ed Templeton, Ryan McGinley, Anne Daems, Miwa Yanagi, Tracey Moffat, Catherine Opie, Tomoko Sawada, Vanessa Beecroft, Yasumasa Morimura, Collier Schorr among others.

Bioetica femminista ed etica della cura: un approccio alle questioni di fine vita

Scopo di tale lavoro è indagare la valenza dell'etica femminista e dell'etica della cura all'interno del campo della bioetica, in particolar modo rispetto ai dilemmi morali attinenti alle questioni di fine vita. Nell'intento di far emergere l'importanza dell'approccio femminista alla bioetica, ci occuperemo inizialmente dell'analisi dell'etica femminista, individuando i tratti caratteristici e le peculiarità proprie di tale pensiero. Secondariamente illustreremo la nascita dell'etica della cura e tratteremo delle differenti correnti che la costituiscono, al fine di mettere in evidenza le caratteristiche principali ascrivibili al pensiero della cura di tipo femminista. Dopo aver preso in considerazione l'etica femminista e l'etica della cura, esamineremo in che termini il concetto di autonomia possa essere interpretato dalla riflessione femminista nel suo complesso, cominciando a riflettere intorno al ruolo che l'etica della cura e l'etica femminista possono avere all'interno del campo della bioetica. In tal senso, prenderemo in esame le caratteristiche e gli obiettivi della bioetica femminista, soffermandoci ad indagare l'apporto che l'approccio femminista può fornire alla discussione intorno alle questioni di fine vita. Al riguardo, esamineremo in che modo l'etica femminista e l'etica della cura possano espandere il discorso bioetico intorno al fine vita, vagliando i timori e le preoccupazioni espresse dalla riflessione femminista e considerando i nuovi scenari e le nuove prospettive tracciate dall'etica della cura.